Autoselect.
Status (on or o ) of the secure boot mode.
Status (on or o ) of the fastboot memory test.
Primary and secondary boot path.
Console and keyboard path.
Using the Boot Console User Interface
To use the boot console user in terface, follow these steps:
1.Shut down your system.
2.Turn o the system, for a few seconds. Then, turn it bac k on.
3. Press 4ESC5 at the prompt \ Searching for system . . . " In a few seconds, this message appears:
Terminating selection process.
A short time later, this message appears and devices that can boot
Searching for potential boot devices. To terminate search, press and hold the ESCAPE key.
Device Selection | Device Path | Device Type and Utilities |
|
| |||
P0 | scsi.6.0 | disk_drive_ identier |
|
P1 | scsi.5.0 | disk_drive_ identier |
|
P2 | scsi.4.0 |
| |
P3 | scsi.3.0 | CD_ROM_drive_ identier |
|
P4 | B |
If your Model 742i is a mem ber of a cluster (a group of computers that share the le system of a host b y means of a net work connection), there ma y be no disks listed because y our system has no disks directly attached to it.
Using the Boot ROM
FINAL TRIM SIZE : 7.0 in x 8.5 in