2Installing Your Model 742i

If you have not installed y our hardware or started y our system, refer to the Installation Guide for your system before going further.

Basic Information

After you have read the Installation Guide for your system, y ou may want to see the following sources for further information:

For a quick reference to commonly-used HP-UX commands, see the Appendix in Using HP-UX .

At some point, you may want to interact with the Model 742i via the LAN using HP VUE with an X Windo w System displa y. HP VUE is the default interface for HP-UX. As a simpler windo w alternativ e, you can also use the X Window System. Both are included in HP-UX. F or further information, see the manual Using the X Window System , Using HP-UX , or HP VUE User's Guide.

The following manuals will also be useful:

If you have not yet installed your HP-UX system, see Installing and Updating HP-UX 9.0 , which covers HP-UX 9.01.

For administration information, see System Administration Tasks .

For troubleshooting HP-UX, see Solving HP-UX Pr oblems , and Chapter 6 in this manual.

For VME con￿guration information, see VME Con￿guration Guide for

HP-UX

2-2 Finding Information About Your System

FINAL TRIM SIZE : 7.0 in x 8.5 in