Configuring HP-UX for Printers and Drives 4-19

\CD ROM-SCSI", followed by its model number and bus address. Choose OK or press 4Return5.

If the device you have connected does not appear on the list:

 

a. Check your hardware connections, and mak e sure that the device is

 

turned on and that there is a disc in it.

 

b. Choose the button

Device Missing , and you will be given the

 

following options:

 

 

i. Have SAM rescan the system for the device. If y ou have connected

 

the device after

starting SAM, y ou should choose Yes . Otherwise,

4

choose No .

 

 

 

ii.Respond to the con￿rmation screen regarding whether the device is connected and powered up.

iii.Respond to the con￿rmation screen regarding whether additional device drivers are needed.

iv.You will be giv en an information screen suggesting things to try if the device still cannot be found. If this is the case, y ou will need to consult Installing Peripher als .

8.From the Actions menu, select Add a Hard Disk Drive . You will see a form giving three tasks:

a.Select a Disk to Add . (Make sure the correct device is displa yed and highlighted).

b.If you need to add drivers to the kernel, SAM will prompt y ou for doing so and will ask whether y ou wish to recreate the k ernel now or later. Mak e this selection by pressing 4Return5 when your selection is highlighted. Then the selection is designated b y an asterisk (*) in its blank. Choose OK to activate that selection.

c.Set Disk Usage and Options . (File system usage is already set for a CD ROM.)

d.Modify Defaults... . (This task is optional). Y ou may want to change certain options, suc h as when to mount the disk and how its access permissions are set. If so, within the \Add a Hard Disk Drive"

FINAL TRIM SIZE : 7.0 in x 8.5 in