HP CM1312nfi MFP manual 6Service menu

Table 2-5System setup menu (continued)

Menu Item	Sub-menu item	Sub-menu item	Description
Product security	On		Sets the product-security feature. When the setting is set to
	Off		On, you must set a personal identification number (PIN).
Courier font	Regular		Sets Courier font values.
	Dark

Table 2-6Service menu

Menu item	Sub-menu item	Sub-menu item	Description
Fax Service	Clear saved faxes		Clear all faxes in memory.
			These include any received
			faxes (including non-printed,
			non-sent PC upload, and non-
			forwarded faxes), unsent faxes
			(including delayed faxes), and
			any printed faxes that are still in
			memory. Deleted faxes cannot
			be recovered. For each deleted
			item, the fax activity log is
			updated.
	Run Fax Test		Perform a fax test to verify that
			the phone cord is plugged in
			the correct outlet and that there
			is a signal on the phone line. A
			fax test report is printed
			indicating the results.
	Print T.30 trace	Now	Prints or schedules a report
		Never	that is used to troubleshoot fax
			transmission issues.
		If error
		At end of call
	Error correction	On	The error correction mode
		Off	allows the sending device to re-
			transmit data if it detects an
			error signal. The default setting
			is on.
	Fax Service Log		The fax service log prints out
			the last 40 entries in the fax log.
Cleaning mode			Cleans the product when
			specks or other marks appear
			on printed output. The cleaning
			process removes dust and
			excess toner from the paper
			path.
			When selected, the product
			prompts you to load plain Letter
			or A4 paper in tray 1. Press
			OK to begin the cleaning
			process. Wait until the process
			completes. Discard the page
			that prints.

ENWW Control-panel menus 19