Control-panel menus

Use the control-panel menus

To gain access to the control-panel menus, use the following steps.

1.Press Setup.

NOTE: To access the function specific menus (HP LaserJet CM1312 (fax/photo-card model) only) press Fax Menu Copy Menu Scan Menu or Photo Menu.

2.Use the arrow buttons to navigate the listings.

Press OK to select the appropriate option.

Press Cancel to cancel an action or return to the Ready state.

Control-panel Setup menu

These sub menus are available from the control-panel main Setup menu:

Use the Copy setup menu to configure basic copy default settings such as contrast, collation, or the number of copies printed.

Use the Reports menu to print reports that provide information about the product.

Use the Fax setup menu to configure the outgoing and incoming fax options and the basic settings for all faxes.

Use the Photo setup menu to configure the basic settings for printing photos from a memory card.

Use the System setup menu to establish basic product settings such as language, print quality, or volume levels.

Use the Service menu to restore default settings, clean the product, and activate special modes that affect print output.

Use the Network configuration menu to configure network settings such as TCP/IP configuration.

NOTE: To print a detailed list of the entire control-panel menu and its structure, print a menu map. See Information pages on page 158.

Table 2-1Copy setup menu

Menu item

Sub-menu item

Description

 

 

 

Default Optimize

Auto Select

Sets the default copy quality.

 

Mixed

 

 

Printed Picture

 

 

Photograph

 

 

Text

 

 

 

 

Default lighter/darker

 

Sets the default contrast option.

 

 

 

Default Collation

On

Sets the default collation option.

 

Off

 

 

 

 

10 Chapter 2 Control panel

ENWW

Page 22
Image 22
HP CM1312nfi MFP manual Control-panel menus, Use the control-panel menus, Control-panel Setup menu, 1Copy setup menu