Paper Handling

Use these options to configure your default settings. For more information, see Use the control-panel menus on page 10.

The following options are available for handling print jobs when the product is out of media:

Select Wait for paper to be loaded.

Select Cancel from the Paper out action drop-down list to cancel the print job.

Select Override from the Paper out action drop-down list to send the print job to another paper tray.

The Paper out time field specifies how long the product waits before acting on your selections. You can specify from 0 to 3600 seconds.

NOTE: You must click Apply before your changes take effect.

Print Quality

Use these options to improve the appearance of your print jobs. For more information, see Control panel on page 7.

Color Calibration

Power On Calibration. Specify whether the product should calibrate when you turn it on.

Calibration Timing. Specify how frequently the product should calibrate.

Calibration Mode. Specify the type of calibration the product should use.

Normal

Full (slower)

Full calibration improves the color accuracy of photos printed on 100 x 150 mm (4 x 6 in) HP Color Laser Photo Paper.

Calibrate Now. Set the product to calibrate immediately.

NOTE: You must click Apply before your changes take effect.

Print Density

Use these settings to make fine adjustments in the amount of each color of toner that is used for your printed documents.

Contrasts. Contrast is the range of difference between light (highlight) and dark (shadow) colors. To increase the overall range between light and dark colors, increase the Contrasts setting.

Highlights. Highlights are colors that are nearly white. To darken highlight colors, increase the Highlights setting. This adjustment does not affect midtone or shadow colors.

ENWW

HP ToolboxFX 167

Page 179
Image 179
HP CM1312nfi MFP manual Paper Handling, Print Quality, Print Density, Color Calibration