HP CM1312nfi MFP manual Copy mixed-size originals, Duplex two-sided copy jobs

Models: CM1312nfi MFP CM1312

1 276
Download 276 pages 63.62 Kb
Page 95
Image 95

Copy mixed-size originals

Use the flatbed scanner when making copies of mixed-size originals. Do not use the ADF.

Duplex (two-sided) copy jobs

Copy two-sided documents manually

Set the multiple-page flatbed copy setting

The multiple-page flatbed copy setting must be set to On before the product will produce two-sided copies from the flatbed scanner.

1.On the product control panel, press Setup.

2.Use the arrow buttons to select Copy setup, and then press OK.

3.Press OK to select Default Multi-page.

4.Use the arrow buttons to select On or Off.

5.Press OK to save the selection.

NOTE: The factory-set default for automatic copy collation is On.

The Collate LED on the control panel is on when collation is on.

Copy two-sided documents manually

1.Load the first page of the document on the flatbed scanner.

2.Press 2-Sided, and then use the arrow buttons to select the correct setting.

3.Press OK, and then press Start Copy.

4.Remove the first page, and then load the second page onto the flatbed scanner.

5.Press OK, and then repeat the process until all of the pages in the original have been copied.

6.When the copy job is completed, press Start Copy to return the product to Ready mode.

ENWW

Copy mixed-size originals 83

Page 95
Image 95
HP CM1312nfi MFP Copy mixed-size originals, Duplex two-sided copy jobs, Copy two-sided documents manually