Load originals for scanning

Automatic document feeder (ADF) (fax/photo-card model)

NOTE: The ADF capacity is up to 50 sheets of 80 g/m2 or 20 lb media.

CAUTION: To prevent damage to the product, do not use an original that contains correction tape, correction fluid, paper clips, or staples. Also, do not load photographs, small originals, or fragile originals into the ADF. Use the flatbed glass to scan these items.

1.Insert the top-end of the stack of originals into the ADF input tray, with the media stack face-up and the first page to be copied on top of the stack.

If the media is longer than letter- or A4-sized paper, pull out the ADF input tray extension to support the media.

2.Slide the stack with printed side up into the ADF until it does not move any farther.

Document loaded appears on the control-panel display.

94 Chapter 11 Scan

ENWW

Page 106
Image 106
HP CM1312nfi MFP manual Load originals for scanning, Automatic document feeder ADF fax/photo-card model