![](/images/new-backgrounds/1152103/15210373x1.webp)
5Connect the stereo
3 | 6 | S |
•Connect the left and right ends of the Y adapter cable into the center/ subwoofer inputs on the back of the receiver/amplifier (5.1 or higher channel system).
•Plug the Y adapter cable into the subwoofer connector on the back of the receiver even if a subwoofer is not used.
6Turn on the receiver/amplifier.
7Select the receiver/amplifier input that the Y adapter cables are plugged into.
8Turn on the PC.
NOTE: Always turn on the PC before you turn on the speaker system.
9After the audio system is connected to the PC, configure the audio software for sound output for your PC model:
•Type 3 connectors: See “Configuring Audio Output with
•Type 6 connectors: See “Configuring Audio Output with Sound Effect Manager” on page 34.
Connecting Digital Audio
(Select models only)
If you have a sound card and you are connecting your home stereo
AV receiver via Digital Out, plug the
To connect digital audio, your PC must include a digital out connector on the sound card or on the back panel. You do not need to connect multichannel speaker outputs if you connect the digital output.
Configuring Speaker and Sound Options | 31 |