HP SR1704CF, SR1798CF, SR1799CF, SR1797CF, SR1796CF Configuring the Realtek HD Sound Effect Manager

Configuring the Realtek HD Sound Effect Manager

1Click the Audio I/O tab.

2Select the option describing the number of speakers in your system — for example, 7.1 speakers.

3Only connectors being used are shown; if the connector is not shown it means that it is not used for the selected speaker configuration.

4Click OK.

To hear DVD movies recorded with multi-channel audio from all speakers, change the audio properties for the DVD player software program to match your speaker configuration (if your DVD program supports more than two channels).

To use a microphone or set up the PC for recording, see “Configuring sound for recording with the Realtek HD Sound Effect Manager” on page 38.

To use Multi-streaming Audio, see “Configuring Multi-streaming Audio” on page 39.

Configuring sound for recording with the Realtek HD Sound Effect Manager

The microphone connector is ready to use for recording sound. If you want to use another connector for recording, such as the Digital Audio In connector, use these steps to select it.

NOTE: The front pink and green connectors can be retasked to perform other audio functions; refer to “Retasking front panel audio connectors” on page 39.

1Click Start on the taskbar; then Control Panel, Sounds, Speech, and Audio Devices, and then Realtek HD Sound Effect Manager.

2Click the Mixer tab.

3In Record click the drop-down list. Choose:

•RealTek HD Digital Input to use the digital audio in connector (select models only).

•Line in/Mic in to use the Audio Line In (In) or the Microphone (Mic) connectors.

4Click OK to close the window.

38Getting Started Guide