IBM System Storage DR550 | Version 3.0 | 17 March 2006 | Page 30 |
|
|
|
|
Installation and Activation
Safety Notices
A danger notice indicates the presence of a hazard that has the potential of causing death or serious injury. A caution notice indicates the presence of a hazard that has the potential of causing moderate or minor personal injury.
Note: For a translation of these notices, see System Unit Safety Information, order number SA23- 2652.
Electrical Safety
Observe the following safety instructions any time you are connecting or disconnecting devices attached to the workstation.
DANGER
•An electrical outlet that is not correctly wired could place hazardous voltage on metal parts of the system or the devices that attach to the system. It is the responsibility of the customer to ensure that the outlet is correctly wired and grounded to prevent an electrical shock.
•Before installing or removing signal cables, ensure that the power cables for the system unit and all attached devices are unplugged.
•When adding or removing any additional devices to or from the system, ensure that the power cables for those devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
•Use one hand, when possible, to connect or disconnect signal cables to prevent a possible shock from touching two surfaces with different electrical potentials.
•During an electrical storm, do not connect cables for display stations, printers, telephones, or station protectors for communications lines.
CAUTION: This product is equipped with a
DANGER: To prevent electrical shock hazard, disconnect all power cables from the electrical outlet before relocating the system.
Laser Safety Information
CAUTION: This product contains a
Laser Compliance
All lasers are certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for class 1 laser products. Outside the U.S., they are certified to be in compliance with the IEC 825 (first edition 1984) as a class 1 laser product. Consult the label on each part for laser certification numbers and approval information.
CAUTION: All IBM laser modules are designed so that there is never any human access to laser radiation above a class 1 level during normal operation, user maintenance, or prescribed service conditions. Data processing environments can contain equipment transmitting on system links with laser modules that operate at greater than class 1 power levels. For this reason, never look into the end of an optical fiber cable or open receptacle. Only trained service personnel should perform the inspection or repair of optical fiber cable assemblies and receptacles.
IBM Storage Systems | Copyright © 2006 by International Business Machines Corporation |
|
|
