
| IBM System Storage DR550 | Version 3.0 | Page 50 |
| ||
|
|
|
|
|
|
|
| System Storage Archive Manager |
|
|
|
| |
|
|
|
|
|
| |
| Account |
| Roles | Password set at Factory |
| |
| hacmpadm | System Storage Archive Manager ID for use with | chang3Me |
|
| |
|
| HACMP scripts |
|
|
|
|
|
| Has TSM operator authority |
|
|
| |
|
| Password set to not expire (you may still want to |
|
|
| |
|
| change it) |
|
|
|
|
| admin | System Storage Archive Manager Administrator ID | admin |
|
| |
|
| Admin login and password is for all TSM |
|
|
| |
|
| administrative usage |
|
|
|
|
|
| http;//<server ip / dns name>:1580 |
|
|
|
It is the customer’s responsibility to change the default passwords provided above and to record and protect the new passwords. Changing the password should be done during the initial installation. The password for root must be changed during the initial installation. Changing the password for the TSM hacmpadm userid will also require a change in one of the scripts provided (see Changing the TSM HACMPADM Password)
Configuring the Single Node System (P5 520 Server)
The System Storage DR550 single node configuration consists of a single P5 520 server. No cluster configuration is included. It is important to understand how the single node configurations are built so you can make the proper changes to incorporate the DR550 in to your network.
DR550 has been configured at the factory with specific settings. Some of these will need to be changed. The setup process requires changing one IP address. The DR550 must have network access to the applications which create or manage data that is to be retained. The DR550 must be connected in to the customer’s IP network using the Ethernet adapter in slot 1 of the P5 520 server(s). This adapter can either be used to connect to a copper network (must order the TX adapter) or a fiber optic network (must order the SX adapter) as referenced earlier in this document.
Connecting to Gigabit Ethernet (Fibre) Network
The following diagram shows the network as configured at the factory. The IP address that must be changed for integration into the customer’s IP network is the address for the single P5 520 server. You do not need to configure any other addresses on the DR550.
IBM Storage Systems | Copyright © 2006 by International Business Machines Corporation |
|
|