IBM DR550 manual Mail alert destination

IBM System Storage DR550 Version 3.0 ------ 17 March 2006 Page 96

2.From the DS4000 Storage Manager client Enterprise Management window, go to Edit -> Configure Mail Server... at the upper left side.

3.Enter your mail (SMTP) server address in the first line. This is the name of the mail server that forwards the e-mail to the configured e-mail alert destination. This server must be able to route data to the network of the receiver. Enter a meaningful sender address information in the second line of the window as shown in Error! Reference source not found.. The sender’s e-mail address is displayed on every mail message that is sent to the configured e-mail alert destination.

If you do not specify an SMTP server name, the Enterprise Management software attempts to send the e-mail using a mail server on the local Storage Management Station. The e-mail sender’s address required in the SMTP protocol must be specified or an error will result.

4.Click OK.

E-mail alert destination

1.Select the e-mail tab from the Edit -> Alert Destinations... menu screen at the DS4000 Storage Manager client Enterprise Management window. The Add/Edit Alerts dialog window opens.

2.Enter the e-mail address of the recipient for alert e-mail notification in the appropriate line. For example, alert@customer.com as shown below.

IBM Storage Systems Copyright © 2006 by International Business Machines Corporation