IBM System Storage DR550 | Version 3.0 | 17 March 2006 | Page 98 |
4.To validate the address you must select the address from the list box again and then click the Validate button. A test message is sent to the selected
5.Click OK on the message box to close it.
SNMP Alert destination
1.Select the SNMP tab from the Edit
2.Enter the SNMP community name in the appropriate field. The SNMP community name is set in the NMS configuration file by a network administrator. The default is public.
3.Enter the trap destination IP or host name in the appropriate field. The SNMP trap destination is the IP address or the host name of a station running an SNMP service.
4.Click Add.
5.To validate an SNMP address, type the address in the text box, and then click Validate. a. Check SNMP destination for SNMP alert validation.
6.Click OK.
IBM Storage Systems | Copyright © 2006 by International Business Machines Corporation |
|
|