IBM System Storage DR550 | Version 3.0 | 17 March 2006 | Page 52 |
|
|
|
|
Single Node - TX adapter
IP Addresses
192.168.5.102
192.168.4.101
CtrlA CtrlB
DS4100
P5 520
192.168.5.26 | 192.168.4.24 |
System board
HMC1
HMC2
10/100/1000 (T5) 10/100/1000 (T6)
USB0 (T7)
USB1 (T8)
Channel | 1 (tape) |
Fibre | - Slot |
2 Gb | Adapter |
|
|
Pwr GXT135p Graphics Adapter - Slot 2
2 Port 10/100/1000 Ethernet TX
2 Gb Fibre Channel Adapter - Slot 5 (DS4100)
192.168.1.11
Gigabit EN Switch #1
(customer's network)
The following table shows the IP addresses associated with the server, storage and customer network. Please note that some addresses may need to be changed while others should not be changed.
IP Address DRS_Engine_1 192.168.1.11 192.168.4.24 192.168.5.26 192.168.4.101 192.168.5.102
IP Description | Device | Configuration Need? |
drs_engine | AIX | To be changed |
drs_engine_DS40001_ctrlA | AIX | Do not change |
drs_engine_DS40001_ctrlB | AIX | Do not change |
drs_DS40001_ctrlA | DS4100 | Do not change |
drs_DS40001_ctrlB | DS4100 | Do not change |
Preconfigured TCP/IP addresses for 10/100/1000t Ethernet networks
Important: Make sure to use the correct adapter(s) and port(s) on the IBM eServer p5 520 server(s) when connecting to your network; check the interface(s) during configuration. Do not connect the IBM System Storage DR550 to your network if you already use the factory IP addresses for any other device within your network environment.
IBM Storage Systems | Copyright © 2006 by International Business Machines Corporation |
|
|