IBM System Storage DR550

Version 3.0 ------

17 March 2006

Page 46

 

 

 

 

Dual Node - All Configurations

P5 520 #2 (DRS_Engine_2)

 

GXT135pPwrGraphics

Adapter- Slot 2

10/100/1000Port Ethernet AdapterX-PCITX - Slot 3 FibreGb2 channel Adapter- Slot 4

FibreGb2 Channel Adapter- Slot 5

System

 

 

 

 

board

 

 

 

 

HMC1

 

 

 

 

HMC2

 

 

 

 

 

10/100/1000 (T5)

 

 

 

 

 

10/100/1000 (T6)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

USB1 (T7)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB2 (T8)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cat 5 cable connected to USB

 

 

 

Conversion Option cable (p/n

 

 

 

78P5833 - 7316-TF3 FC 4269 ) -

 

7310-CR2 HMC

IBM Supplied

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7316-TF3 Console with

phone cable (IBM

KVM switch (FC 4202)

and IBM supplied video,

supplied) plugged into right

keyboard and mouse

side phone jack in HMC and

cables (FC 4242)

connected to analog phone

 

jack (supplied by customer)

 

Ethernet Crossover cables - IBM Supplied

P5 520 #1 (DRS_Engine_1)

 

 

GXT135pPwrGraphics

Adapter- Slot 2

10/100/1000Port Ethernet AdapterX-PCITX - Slot 3 FibreGb2 channel Adapter- Slot 4 FibreGb2 Channel Adapter- Slot 5

 

System

 

 

 

 

board

 

 

 

 

HMC1

 

 

 

 

HMC2

 

 

10/100/1000 (T5) 10/100/1000 (T6)

2 USB1 (T7)

USB2 (T8)

Cat 5 cable connected to USB Conversion Option cable (p/n 78P5833 - 7316-TF3 FC 4269 ) - IBM Supplied

Netbay LCM

Cat 5 cable connected to CT2 Conversion Option cable (p/n 32P1637) connected to Out port in HMC server - IBM Supplied

As an option, you can attach an external monitor using the serial ports on the P5 520s. To interact with the system software interfaces or to run diagnostics from a DVD-RAM using an external device, you will need to do the following:

Connect a terminal (or PC) to the serial port FS1 (on the front of the unit) using a null- modem cable (RJ45 to 9 pin Serial cable which is provided by IBM)

Your PC may need to use an emulator, such as HyperTerminal, often supplied with Windows family operating systems. Set the emulation mode to vt100 and use the following communication settings:

19200 baud

8 bit

1 stop bit

No parity

Xon/Xoff

The following procedure is to connect the ASCII (tty) terminal (or PC) to the P5 520 (this is provided as information only as it is recommended that you use the integrated console for all DR550 management activity:

1.Before doing this step, read and understand “Read the Safety Notices”.

2.This system drawer is equipped with serial port 1 located in the front (FS1) and rear (S1) of the system.

3.Use an RJ-45 to 9-pin serial null modem cable (IBM supplied) to connect to the front serial port FS1.

4.When using FS1, the rear serial port 1 is deactivated.

IBM Storage Systems

Copyright © 2006 by International Business Machines Corporation

 

 

Page 46
Image 46
IBM DR550 manual Dual Node All Configurations