Climate Control
Deselecting air recirculation cancels AUTO mode.
Latched Air Recirclation
To latch air recirculation (so that
it remains selected), press and hold the air recirculation button until the
to the latched recirculation symbol.
Selection is also indicated by two beeps and the button LED flashing four times then remaining illuminated.
Selecting latched recirculation cancels AUTO mode.
!WARNING:
Prolonged operation with recirculation selected in cold, damp conditions could result in interior condensation.
Windscreen Defrost/Demist
Frost and heavy misting
To remove frost or heavy misting from the windscreen, press the DEF button.
•The blower switches on automatically at a high speed but the speed can be increased or decreased manually if required.
•Air conditioning switches on automatically and cannot be deselected.
•Recirculation is cancelled and cannot be selected.
•The front screen heater and the rear screen heater/door mirror heaters switch on automatically, provided the engine is running.
To deselect defrost mode, press DEF again, or press AUTO (recommended operating mode).
Light misting
To prevent or remove light windscreen misting, select manual air distribution to windscreen and feet (see ‘Manual Air Distribution’, page 27).
Heated Screens and Door Mirrors
The front screen heater (F) and the rear screen heater (R) may
be switched on and off in any mode, including system off, but
only operate when the engine is running. The door mirror heaters
are also controlled by the rear screen heater button.
The front screen heater (where fitted) switches off automatically after 4 minutes. The rear screen and door mirror heaters switch off automatically after 10 minutes.
The windscreen heaters may be manually deselected during the time out period using the buttons.
26
