
Using the System
Recalling the nametag you have just stored
Your instructions to the system | System response |
Press and release the voice button | ‘Beep’ |
|
|
After the beep say ‘Radio tune my | The system responds with: |
favourite station’ | ‘Radio tune my favourite station’ and |
| |
| tunes the radio to the frequency stored |
| with this name |
|
|
Now try storing a nametag of your choice, and then recalling it.
Entering a Phone Number
Your instructions to the system | System response |
Press and release the voice button | ‘Beep’ |
After the beep say ‘Phone enter zero | The system responds with: |
one six one four’ | ‘Phone enter oh one six one four, …… |
| |
| Continue entering digits or say dial, store, |
| correction or cancel’ |
|
|
Press and release the voice button | ‘Beep’ |
|
|
After the beep say ‘nine six oh nine nine | The system responds with: |
eight’ | ‘nine six oh nine nine eight, …… Continue |
| |
| entering digits or say dial, store, |
| correction or cancel’ |
|
|
Press and release the voice button | ‘Beep’ |
|
|
After the beep say ‘Cancel’ | The system responds with: |
| ‘Enter cancel’ |
|
|
Now try entering a phone number of your choice and try some of the following commands:
1.DIAL, dials the number entered.
2.STORE, stores a nametag of your choice (as in the above example with
RADIO STORE NAME).
3.CORRECTION, deletes the last string of digits entered, and allows you to
4.CANCEL, cancels the command.
Note: When entering a number of your choice, remember numbers can only be given as single digits, but you can enter the digits in as many groups as you like.
Also, when the system has read out the numbers you have entered, you do not have to wait for the ‘Continue entering digits’ prompt. Simply press the voice button and continue with your dialogue.