Jaguar JJM 18 42 26 701 manual Ignition On, Climate Control Displays, Auto Mode

Models: JJM 18 42 26 701

1 132
Download 132 pages 63.9 Kb
Page 24
Image 24

Climate Control

Ignition On

The climate control system operates in position ‘II’ (run) of the ignition switch.

When the ignition is switched to run or the engine is started, the Jaguar logo will be displayed briefly followed by the last touch-screen selected (e.g. radio).

The climate control system will be set to the climate operating mode selected previously.

Climate Control Displays

There are two climate control touch-screen displays, one for the system ‘ON’ state and the other for system ‘OFF’/ram air mode. Smaller pop-up displays appear briefly when selecting air recirculation or adjusting the blower speed.

Most climate functions can be selected using the perimeter buttons without displaying the climate touch-screen buttons.

To select the touch-screen display, press the CLIMATE button.

To exit the climate control screen, select another system function, e.g. AUDIO.

AUTO Mode

Automatic operation provides a controlled environment over a temperature range of 61°F to 89°F (17°C to 31°C) and should be regarded as the normal operating mode.

To select automatic climate

control press the AUTO button and select the required

temperature.

The AUTO mode touch-screen is shown above. If the touch-screen is not displayed, press the CLIMATE button.

Front and rear screen heating and timed air recirculation may be selected while remaining in AUTO mode. Selecting any other climate control perimeter button or touch-screen button will cancel AUTO operation.

Automatic operation cannot be deselected using the AUTO button. To exit AUTO mode, select another climate mode or touch the system ON/

OFF button to switch the system off.

24

Page 24
Image 24
Jaguar JJM 18 42 26 701 manual Ignition On, Climate Control Displays, Auto Mode