Route Guidance
Following Guidance
!WARNING:
Only operate, adjust or view the system when it is safe to do so.
After touching Start, the initial map screen while under guidance is displayed. The route is shown highlighted, with the current road name shown in the text area at the bottom of the screen.
Drive away, following the voice guidance given by the system. Continue to follow the voice guidance until the end of the route is reached.
The
Distance units
Distances are shown on the screen, and given in voice guidance, either in miles or in Metric units (kilometres and metres).
For information on changing the unit selection, see ‘User settings’, page 19.
Time/distance to destination
While driving under guidance, the estimated time (if selected) and distance remaining to the end of the route are shown on the screen.
While
Message centre guidance
(where fitted)
Route guidance information can be displayed on the instrument panel message centre. The display of this information on the message centre can be selected or deselected as required, see ‘Guidance options:’, page 74.
Breaks in journey
While driving under guidance, the journey can be broken without affecting the stored route. When the journey is continued, the route guidance will resume automatically.
Whole route display
The map screen showing the entire route can be displayed. This is selected from the Route Options menu, see ‘Display Whole Route’, page 70. From this screen the display of the last portion of the route and the route turn list can be selected.
Avoiding points and areas
At any time while a route is set, you can select a point to be avoided on the current route. This can be enlarged into an avoid area if required. When the route is recalculated, the points or areas selected will be avoided (where possible), see ‘Turn list’, page 70.
98