Jaguar JJM 18 42 26 701 manual Cassette Player Operation

Cassette Tape

Cassette Player Operation

In TAPE mode, touch-screen buttons (shown above) provide for selection of cassette tape track, Dolby and change sides.

The display will show the cassette screen and indicate SIDE 1. The cassette symbol will be displayed until the tape is ejected, regardless of the selected audio source.

When loaded, a tape immediately plays and after playing one side, auto-reverses and plays the other. Equalisation of non-ferric tapes is automatically adjusted.

Eject

Press to eject the cassette.

TAPE button

If you are playing the radio or CD changer, pressing TAPE will play

any cassette in the player.

This function can also be controlled by a button on the steering wheel

(see page 31).

Dolby B

When using a cassette with a ‘Dolby’ recording, the noise

reduction system can be selected by pressing the DOLBY button. DOLBY will be displayed to indicate the system is active.

Dolby noise reduction system is manufactured under licence from Dolby Laboratories Licensing Corporation. ‘Dolby’ and the double-D symbol are trademarks of Dolby Licensing Corp.

Changing tape side

Touch and release to change to other side of cassette tape.

This function can also be controlled by a button on the steering wheel (see page 31) or the TAPE button.

Fast forward and rewind

These controls have two functions, to seek a track,

and tape fast forward or

rewind. Momentarily pressing the right-hand button will locate the beginning of the next track. Similarly pressing the left-hand button, will return to the beginning of the current track. Pressing and holding the appropriate button for 2 seconds will activate continuous fast forward or rewind of the tape. This can be cancelled by pressing either button again.

33