Voice Command List
Navigation Commands
(Front use only)
•[NAVIGATION] SHOW DESTINATION
•[NAVIGATION] SHOW [CURRENT] POSITION
•[NAVIGATION] SHOW WHOLE ROUTE
•[NAVIGATION] SHOW NORTH UP
This will orientate the map display to have North heading towards the top of the screen.
•[NAVIGATION] SHOW (HEAD/HEADING) UP
This will orientate the map display to have the vehicle heading towards the top of the screen.
•[NAVIGATION] ZOOM IN MAXIMUM
This will adjust the screen display to show maximum magnification.
•[NAVIGATION] ZOOM OUT MAXIMUM
This will adjust the screen display to show minimum magnification.
•[NAVIGATION] [SELECT] ROUTE HOME
This sets a route to the ‘home’ location. The ‘home’ location must previously have been stored in the navigation system.
•[NAVIGATION] REROUTE
This will force a manual recalculation of the route based upon the current position of the vehicle. This can be used when starting a route from an unmapped area when the nearest road selected by the navigation system is not the road used to exit that area.
•[NAVIGATION] VOICE GUIDANCE ON
•[NAVIGATION] VOICE GUIDANCE OFF
•[NAVIGATION] REPEAT [LAST] INSTRUCTION
•[NAVIGATION] ZOOM LEVEL <zoom level>
Note: There are 13 zoom levels. Zoom level 1 represents maximum magnification.
•[NAVIGATION] ZOOM IN <zoom increment level>
•[NAVIGATION] ZOOM OUT <zoom increment level>
•[NAVIGATION] CLEAR ROUTE
•[NAVIGATION] SHOW TURN LIST
Displays details of the next three turns for the route currently set in the navigation system.
•NAVIGATION STORE NAME
Stores the currently selected location, with a nametag of your choice.
The system will prompt you with ‘NAME PLEASE’, press and release the voice button and give a nametag of your choice, as in the RADIO STORE NAME, see ‘Storing a nametag to this station’, page 108. A total of 20 navigation nametags can be stored.
•[NAVIGATION] [SELECT] DESTINATION <nametag>
•[NAVIGATION] ADD WAY POINT <nametag>
A way point is a
•[NAVIGATION] CLEAR NEXT WAY POINT
