Navigation - Overview
Errors in Vehicle Position
Under certain driving conditions, it is possible that the vehicle position shown on the map display may be incorrect. Some examples are shown below:
•When the vehicle is transported by ferry or train.
•Driving on steep roads.
•After vehicle battery removal or supply fuse failure.
•When using snow chains.
•After the tyres have been replaced.
•After the vehicle has been rotated on a turntable.
•Where there are two roads parallel to each other.
•Elevated roads in proximity to other roads.
•Driving up or down circular ramps in car parks.
The position will usually be corrected automatically. If the problem persists, see ‘Calibration’, page 73, or consult your Jaguar Retailer.
Safety Information
IMPORTANT: Do not use the system until you have familiarised yourself with its operation.
The road safety caution is displayed each time the ignition is switched on, and the navigation system is selected.
The caution screen gives the following information:
Most functions are inhibited whilst the vehicle is in motion.
Please read the handbook for operating instructions.
Always obey traffic regulations.
•To use the system, read the caution and touch Agree.
Using the System
Caution: If the system is used for an extended period of time with the vehicle stationary, ensure that the engine is running, to avoid draining the battery.
For best results, always use the latest version of the Navigation System DVD (navigable map database).
52
