Basic Screen Displays
NAV button
The NAV button has the following functions:
•Selects the navigation system.
•While the navigation system is selected, selects the initial map display from any other screen.
•After scrolling, returns to the map display of current vehicle position.
Note:
1.If the navigation system was selected when the ignition was switched off, it will be selected automatically when the ignition is switched on again.
2.When switching back to navigation from another
Map orientation buttons
These buttons select the desired map orientation (north or vehicle heading
to the top of the screen). The current selection is shown on the map.
Note: Above the 2 miles (4 kilometres) zoom level, only north orientation is available.
Audible repeat button
While under guidance, repeats the last audible instruction and
shows the relevant junction diagram (if in range).
Note:
1.If the manoeuvre point has been passed, the audible instruction for the next manoeuvre point will be heard.
2.Repeat is also available while one of the other
Telephone button
Calls the telephone number currently shown on the screen. Only available when a
Jaguar telephone is fitted.
Additional Buttons
After touching the screen once, additional buttons are displayed.
Home button
Sets a route to the home position. (Only displayed when a home position is set.)
Chg. Route button
Displays the Route
Options menu for changing the route
preference settings. (Only displayed when a route is set.)
Ent. Dest. button
Stores a selected map location as a destination.
see ‘Confirm Destination’, page 67. (Displayed in place of the Chg. Route button, after touching the screen twice within 5 seconds.)
Store button
Stores a selected map location as a memory point.
59
