Safety
WARNING!!! High temperature, ultraviolet and infrared light. Refer all service to factory authorized personnel.
Ultraviolet radiation, dangerous glare, and high internal gas pressure
is present at the Xenon Arc Lamp. It is contained in a protective reflector housing module.
DO NOT operate the Xenon Arc Lamp outside its intended standard housing or outside of the projector.
When replacement is required, the arc lamp must be replaced as an entire module as outlined in the
No attempt should ever be made to replace the arc lamp inside its module!
The arc lamp produces dangerous intense light with hazardous levels of ultraviolet and infrared radiation. It operates at high temperatures (180ºC, maximum 300º C or over 500º F).
Do not touch the xenon arc lamp or any connections when the lamp is ignited or is arcing.
WARNING!!! BRIGHT LIGHT! Never look directly at the Arc Lamp, the lighted Projection Lens, or into the lamp housing, from any distance, when the projector is ON and light is projected. Direct exposure to light of this brightness can cause severe eye injury.
WARNING!!! High voltage access and safety interlock. Defeat restricted to factory authorized service personnel!
WARNING!!! High voltage points up to 40,000 volts are exposed inside the covers. Allow at least one minute to bleed off high voltage even after the unit has been turned off.
Due to high voltage danger, DO NOT TOUCH:
!White cables to
!CRT
!Main power +/- supply
!80 amps can flow across the terminals.
viii | Model 330, 340SC, and 370SC Service Manual |
