3. Turning the power off
Make sure that operations such as song playback or recording are completed, and turn off the power by fol- lowing the
Before you
Turn the volume of all connected devices to the minimum setting, and turn off each power switch in order, beginning with the last device that receives the audio signal.
Never turn off the power when the card access icon is dis- played. Doing so will destroy not only the selected song, but may also destroy the songs on the card as well as the Smart- Media itself.
Listening to the demo songs
The included card contains demo songs. Here’s how you can listen to these demo songs.
1Connect headphones or a monitor amp to the PXR4. Make connections as described on p.12.
2Turn on the power of the PXR4. (→ p.13)
Introduction
3Set the [TRACK] fader of
the PXR4 to 8, and the [MASTER] fader to 0.
4 Select the song that you want to play back.
(→ p.23: Step 2 “2. Selecting a different song”)
5If a “ 
” symbol is displayed at a track number in the display, press the corresponding [REC SELECT] key so that only the number is shown.
6Press the [PLAY] key to begin playback.
7Slowly raise the [MASTER] fader to
adjust the volume level.
If you are using headphones, raise the
[MASTER] fader to about 6, and then use the [PHONE LEVEL] knob to make adjustments.
8When the demo song has finished playing, press the [STOP] key to stop playback.
Demo song list “Duck Teeth”
Written and performed by “The DM Project”
The DM Project
Ryan Rhodes — guitars Justin Hosman — bass Joe Kirsch — drums
© 2001 The DM
“SHINY METAL OBJECTS”
Written and performed by Mumbo Jumbo Band © 1999 Mumbo Jumbo
15
