Korg PXR4 owner manual Record → p.25, Check the input level

Quick start

4. Record (→ p.25)

Specify the recording track

Press the track 1 [REC SELECT] key to make the “ ” symbol appear for track 1.

Check the input level

Hold down the [SHIFT] key and press the [MIXER] to switch the “DISPLAY” indicator in the screen to “PRE” (pre-fader level).

While watching the level meter, turn the [INPUT TRIM] knob a little at a time to adjust the recording level.

Set the level as high as possible without allowing the level meter to reach “CLIP.”

Set the recording level

Hold down the [SHIFT] key and press the [MIXER] key to switch the “DISPLAY” indicator in the screen to “POST” (post-fader level).

18

While watching the level meter, slowly raise the [TRACK] fader for that track.

As you gradually raise the [TRACK] fader, the level meter of the input track will change according to the level of the input track. Set the level as high as possi- ble without allowing the meter to reach “CLIP.”

To hear the sound that is being input, raise the [PHONE LEVEL] konb, [MASTER] fader to an appropriate vol- ume.

Press the [REC] key

Press the [REC] key to enter record-standby mode. The “REC” icon in the display will blink.

Press the [PLAY] key

When you are ready to perform, press the [PLAY] key. Recording will start, so begin playing your instru- ment. During recording, the “REC” icon and “PLAY” icon will be lit.