If the sound is distorted, slightly lower each of the LEVEL, TREBLE, MIDDLE, and BASS settings.
*The parameters are the same as “CLASSIC COMP.”
2.LIMITER
Limiter (LIMITER)
This limits the peaks of the input signal to the specified level.
1. | THRESHOLD | |
|
| sion will apply. |
2. | RATIO | [0...10]: Adjusts the ratio at which the signal |
|
| will be compressed. |
3. | ATTACK | [1...10]: Adjusts the attack time. |
4. | RELEASE | [1...10]: Adjusts the release time. |
5. | LEVEL | [0...10]: Adjusts the overall level. |
3. BASS DRIVE
This block is designed specifically for bass; it enhances the low range and broad dynamics of the bass guitar.
B Comp (BASS COMP)
This is a compressor that emphasizes the sense of attack. It makes your picking more consistent, and produces a smooth sustain.
If the sound is distorted, slightly lower each of the LEVEL, TREBLE, MIDDLE, and BASS settings.
1. | SENSE | [1...10]: Adjusts the sensitivity of the compres- |
|
| sor. |
2. | LEVEL | [0...10]: Adjusts the output level. |
3. | TREBLE | |
4. | MIDDLE | |
5. | BASS |
Effect parameters
B Ovdrv (BASS OVERDRIVE)
This model simulates the natural distortion of an amp.
1. | GAIN | [1...10]: Adjusts the amount of distortion. | |
2. | LEVEL | [0...10]: Adjusts the output level. | |
3. | TREBLE | ||
4. | MIDDLE | ...+18]: Adjusts the middle (mid range) tone. | |
5. | BASS | ...+18]: Adjusts the bass (low range) tone. |
B Dist (BASS DISTORTION)
This distortion effect is designed especially for bass.
*The parameters are the same as “BASS OVERDRIVE.”
B Octave (BASS OCTAVE)
This is an octave effect designed especially for bass.
1. | DEPTH | [0...10]: Adjusts the volume of the octave. | |
2. | LEVEL | [0...10]: Adjusts the output level. | |
3. | TREBLE | ||
4. | MIDDLE | ...+18]: Adjusts the middle (mid range) tone. | |
5. | BASS | ...+18]: Adjusts the bass (low range) tone. |
B OctDst (BASS OCTAVE DISTORTION)
This is a octave + distortion effect designed especially for bass.
* The parameters are the same as “BASS OVERDRIVE.”
73