Operation

3. Tuning

The PXR4 has a built-in tuner function.

This lets you tune an instrument connected to the [GUI- TAR IN] jack or [LINE IN] jack, or by using the internal mic.

Tuning your guitar

1Connect your guitar to the [GUITAR INPUT] con- nector.

Set the [INPUT SELECT] switch to GUITAR.

If you want to tune using the internal mic, set this [INPUT SELECT] switch to MIC. If you want to tune an instrument connected to LINE, set this switch to LINE. However in the case of an instrument connected to LINE, only the L channel can be tuned.

2Enter Tuner mode.

While stopped, press the [EFFECT/TUNER] key to enter Tuning mode.

If EFFECT ASSIGN has been assigned, press the [EFFECT/TUNER] key once again to enter Tuner mode.

 

3 Tune your instrument.

 

Make sure that your guitar is connected to the [GUI-

 

TAR INPUT] jack, and play a string on your guitar.

 

The character display area of the screen will function

22

as a tuning meter, and will display the note name.

 

Tune the string while watching the amount of tuning difference (displayed in units of cents) and the meter in the display.

The reference pitch frequency is A=440 Hz.

When the tuning is correct

If you do not want the sound to be heard while tuning, set the [MASTER] fader to 0.

4Exit Tuner mode.

Press the [EXIT] key to exit Tuner mode.

Page 24
Image 24
Korg PXR4 owner manual Tuning your guitar