Parameters
standby.
MARK
In these pages you can use marks to change the current time location, and can also delete marks. This page cannot be selected if no marks have been registered.
P.1-1 SelectMark: Select a mark
Here you can select a mark, and change the current time to the location of that mark.
1.MarkLocation....................................................................
This displays the time location of the registered marks. If you pressed the [CURSOR] right key to delete a mark, you can confirm the time location here.
2. MarkNumber | [00…99, End] |
This displays the number of the registered marks. Use the dial to select a number and move to that location.
P.2-1 DelMark (Delete Mark): Delete a mark
Here you can delete the selected mark. When the mark selection is displayed, pressing the [CURSOR] right key will delete that mark.
1. DelMark? (Delete Mark) | [All, 01…99] |
This will indicate the selected “MarkNumber” that you selected for deletion. Press the [CURSOR] right key to delete the mark.
All: If you select “End” for “MarkNumber,” all marks will be deleted.
MIXER
Here you can set the volume level (Level) and stereo posi- tion (Pan) of each track. If the effect type is “MASTER,” you an also set the send level (SendL, SendR) sent from each track to the effect.
You can also use the faders to set these parameters, as well as selecting each parameter and using the dial. (→ p.21)
P.1-1 Level: Volume level adjustment
Adjusts the volume level of each track. |
|
1. Level# | |
1a. Level 1 | [000…127] |
This can also be edited by [TRACK] fader 1. |
|
1b. Level 2 | [000…127] |
This can also be edited by [TRACK] fader 2.
1c. Level 3 | [000…127] |
This can also be edited by [TRACK] fader 3.
1d. Level 4 | [000…127] |
This can also be edited by [TRACK] fader 4.
P.2-1 Pan: Pan adjustment
Adjusts the stereo position (Pan) of each track.
1. Pan# | [L30…Cnt…R30] |
(#= 1, 2, 3, 4) *Refer to
66
The marks at “00,” “End,” and
