Appendices
Is the return level set to “0” or close to “0”?
→Press the [EFFECT] key to access Effect mode, press the [CURSOR] right key several times to display “EffRetLv,” and raise the return level.
Final effect does not apply
Is the effect insert location correct?
→Hold down the [SHIFT] key and press the [EFFECT] key, and set “EFFECT ASSIGN” to “FINAL.” (→ p.35)
Rhythm
Can’t hear rhythm sounds
Is rhythm selected?
→Hold down the [SHIFT] key and press the [RHYTHM] key, and in the page that appears set “Rhythm” to a setting other than “Off.” The rhythm icon will appear
in the upper right of the display.
The rhythm volume may have been lowered.
→Press the [SYSTEM] key, and when “Tempo” appears, press the [CURSOR] right key four times to display
“RhythmLv.” Then adjust the rhythm volume. The recorder may be stopped.
→Press the [PLAY] key to play back. The rhythm will sound when the recorder is recording or playing.
If you want to hear the rhythm while the recorder is stopped, press the [SYSTEM] key to display “Tempo,” and press the [CURSOR] right key to enter the Tempo Edit page.
Rhythm sound does not stop (volume is too loud)
Has the rhythm been turned on?
→If the rhythm icon is displayed, hold down the [SHIFT] key and press the [RHYTHM] key, and turn the “Rhythm” setting “Off.”
The rhythm icon in the upper right of the display will
disappear.
Is the rhythm volume raised excessively?
→Press the [SYSTEM] key to display “Tempo,” and press the [CURSOR] right key to display “RhythmLv.” Adjust the volume in this screen.
Nothing happens when you press a key
In some cases, a key may not function while the recorder is playing or recording.
→Stop the recorder and try the operation once again.
In Effect/Tuner mode, it is not possible to change the “EFFECT ASSIGN” setting.
→Press the [EXIT] key to execute Effect mode, and then select the desired setting.
Card
Display indicates “No Card”
Is the card inserted correctly? (→ p.12)
→Turn off the power,
86
