Effect parameters
PPDelay (STEREO PING PONG DELAY)
This is a stereo delay in which the sound bounces between left and right.
1. | TIME | [0...1.75s]: Adjusts the delay time. |
2. | FEEDBACK | [0...10]: Adjusts the feedback (delay repeats). |
3. | TONE | [0...10]: Adjusts the tone of the delayed |
|
| sound. |
4. | MODE | [1, 2]: Switches the order of output. |
|
| 1: Output from L, 2: Output from R |
5. | MIX | [0...10]: Adjusts the mix amount of the |
|
| delayed sound. |
Room (ROOM)
This simulates the acoustics of rooms ranging from a small
1. | TIME | [1...10]: Adjusts the length of reverberation. |
2. | ||
3. | TONE | [1...10]: Adjusts the tone of the reverberation. |
4. | ||
5. | MIX | [0...10]: Adjusts the mix amount of the rever- |
|
| beration. |
Hall (HALL)
This simulates the acoustics ranging from
*The parameters are the same as “ROOM.”
Spring (SPRING)
This simulates the spring reverb unit built into some guitar amps.
*The parameters are the same as “ROOM.”
Plate (PLATE)
This simulates a plate reverb unit.
* The parameters are the same as “ROOM.”
NR/GATE BLOCK
The NR/GATE block is not displayed as an effect module, but can be selected as part of the edit parameters.
1. NR
NR (NOISE REDUCTION)
This effect suppresses noise.
1. | NR SEND | [0...10]: Adjusts the depth of the effect. |
2. | ||
3. | ||
4. | ||
5. | ||
It is not possible to turn “NR” off. If you do not want to apply the effect, set “NR SEND” to “0.”
2. GATE
Gate (GATE)
This effect suppresses noise.
1.GATE THRESHOLD . [0...10]: Adjusts the level at which com- pression is applied.
2. | GATE ATTACK | [1... | 10]: Adjusts the attack time. |
3. | GATE RELEASE | [1... | 10]: Adjusts the release time. |
4. |
| ||
5. |
| ||
It is not possible to turn the “GATE” off. If you do not want to apply the effect, set “GATE THRESHOLD” to “0.”
80
