Use the dial to select the number of times to copy the data. For this example, select “3” as the number of times. Then press the [CURSOR] right key.
7Select “EditMode” (editing unit). For this example, select “Fast.”
If the editing location turns out to be inaccurate, undo the operation, and then select “Best” and try the operation again.
If you select “Best,” some time may be required for process- ing.
8Select the “InTime.”
Turn the dial to select the mark number that you regis- tered at the In time location. Then press the [CURSOR] right key.
By pressing the [CURSOR] down key, you can edit the time location of the selected mark. You can also press the [PLAY] key to play back the sound for approximately two seconds from the selected time location.
Operation
9Select the “OutTime.”
Turn the dial to select the mark number that you regis- tered at the Out time location. Then press the [CUR- SOR] right key.
By pressing the [CURSOR] down key, you can edit the time location of the selected mark. You can also press the [PLAY] key to play back the sound for approximately two seconds from the selected time location.
0Select the “ToTime.”
Turn the dial to select the mark number that you regis- tered at the To time location. Then press the [CUR- SOR] right key.
By pressing the [CURSOR] down key, you can edit the time location of the selected mark. You can also press the [PLAY] key to play back the sound for approximately two seconds from the selected time location.
AExecute the Copy operation.
When the display asks “CopyOK?,” press the [CUR- | 45 |
|
