Operation
4. Loading/saving an effect user file
A card can contain two effect user files: 1 and 2. An effect user file contains all of the user programs.
The file loaded at power-on
When the power is turned on, file 1 (1.EFF) will be loaded, and this will also be the save destination when effect pro- grams are saved.
If no effect user file (1.EFF) has been saved on the card, the data stored in the PXR4 itself (the default settings) will be loaded.
Simply exchanging cards will not change the contents of the effects.
To save to a different effect user file
1Display the “CardUtl” page.
Press the [SYSTEM] key to display the “CardUtl” page.
2Display the “CdFxSave” page.
Press the [CURSOR] right key, and then press the [CURSOR] down key to display the “CdFxSave” page.
3Select the desired effect user file.
Press the [CURSOR] right key to display “Save Num.” Use the dial to select the file number.
4Save the file.
Press the [CURSOR] right key. The display will ask “Sure?,” so use the dial to select “Yes,” and press the [CURSOR] right key. If you select “No,” the data will not be saved.
Loading a different effect user file
1Display the “CardUtil” page.
Press the [SYSTEM] key to display the “CardUtil” page.
2Display the “CdFxLoad” page.
Press the [CURSOR] right key, and then press the [CURSOR] down key to display the “CdFxLoad” page.
3Select the desired effect user file.
Press the [CURSOR] right key to display “Load Num.” Use the dial to select the file number. If you select “Int,” the data (factory settings) stored in inter- nal memory will be loaded.
4Load the file.
Press the [CURSOR] right key. The display will ask “Sure?,” so use the dial to select “Yes” and press the [CURSOR] right key. If you select “No,” the file will not be loaded.
40
