3From the Copy Mode menu, you can:
•Press to preview the job.
•Press to return to the Copy Mode menu from the preview.
•Press or repeatedly to scroll through the submenus or menu items until you reach the one you want
to change.
•Press or repeatedly to reach the value you want.
For example, to change the number of copies, press to reach Copies. Then press repeatedly until
the number of copies you want appears.
4To go into other submenus, menu items, and values to make additional changes, continue to use the navigation
buttons ( , , , and ).
5If needed, press repeatedly to return to the previous menu.
6Press to start the copy job.
The following table explains the function of each submenu or menu item in the Copy Mode menu.
Use this To
Color Specify to print in Color or in Black & White.
Copies Specify how many copies to print.
Resize Specify the percentage for enlarging or reducing a copy.
Quality Adjust the quality of a copy.
Lighter / Darker Adjust the brightness of a copy.
Paper Handling Specify the size and type of paper loaded. For more information, see
“Using the Paper Handling submenu” on page 63.
Collate Collate copies as they exit.
2-Sided Original Specify whether the original document is two-sided. Choosing On will
allow duplex printing or printing on both sides of the paper.
N-Up Choose how many page images to print on one side of a sheet of paper.
Layout Choose how many copies of an image to print on a page.
Original Size Specify the size of the document being copied.
Content Type Specify the contents of your original copy, such as photo, text only, line
drawing, or text and graphics.
Change Default Settings Specify the values you want for each of the menu items in the Copy
Mode menu.
Press or to enter this submenu.
When all the values have been chosen, press to save the values as
default settings and exit this submenu.
104