Lexmark 7500 Series Using the Change Photo Default Settings submenu, Transferring photos from a memory device to the computer using the control panel

Use this To
Paper Handling Specify the size and type of paper loaded. For more
information, see “Using the Paper Handling submenu”
on page 63.
Using the Change Photo Default Settings submenu
1From the Setup menu, press or repeatedly until Change Photo Default Settings is highlighted.
2Press .
3After changing values, press to save these values and exit this submenu.
Use this To
Photo Size Set the photo size.
Layout Specify a layout for the photos.
Quality Specify a print quality for the photos.
Paper Handling Specify the size and type of paper loaded. For more information, see “Using the Paper Handling
submenu” on page 63.
Transferring photos from a memory device to the computer using the control
panel
If the printer is connected directly to a computer, or connected to a computer through a wireless network connection,
you can transfer photos from a memory card or flash drive to the computer.
Notes:
•You cannot transfer photos from a memory device to a computer through an external network adapter that does
not support memory device connection.
•The printer may require that you select a computer (and a PIN if required by that computer).
1Insert a memory card or a flash drive that contains the images you want to transfer.
2After the memory device is detected, press .
3Press repeatedly until Save Photos is highlighted.
4Press .
5Press or to select Computer.
6Press .
If the computer is connected directly to the printer through a USB cable:
aPress to begin saving photos to your computer.
bFollow the instructions on the computer screen.
If the printer is connected to a wireless network, you will be asked to select the computer that you want to use.
aPress or to select a computer.
bPress .
83