Adjust the brightness of the copy
1Load the document facedown on the scanner glass.
2From the control panel, press or repeatedly to choose Copy.
3Press .
4Press repeatedly to choose Lighter/Darker.
5Press or repeatedly to lighten or darken the copy.
6Press Start.
Check quality of original document
If the quality of the original document is not satisfactory, try using a clearer version of the document or image.
Are you scanning from photo or glossy paper, a magazine, or a newspaper?
If you are copying or scanning from photo or glossy paper, a magazine, or a newspaper, see “Removing wavy
patterns from scanned photos, magazines, or newspapers” on page 91.
Check document placement
Make sure the document or photo is loaded facedown on the scanner glass in the lower right corner.
Copied item does not match the original item
Is the original document loaded correctly on the scanner glass?
•Make sure the original document is placed in the lower right corner of the scanner glass.
•Place the item you want to copy facedown on the scanner glass.
•Make sure the lower right corner of the front of the item lines up with the arrows in the lower right corner of the
scanner glass.
Partial document or photo copies
These are possible solutions. Try one or more of the following:
Check document placement
Make sure the document or photo is loaded facedown on the scanner glass in the lower right corner.
186