Reconnect power supply
1Press to turn the printer off.
2Disconnect the power cord from the wall outlet.
3Gently remove the power supply from the printer.
4Reconnect the power supply to the printer.
5Plug the power cord into the wall outlet.
6Press to turn the printer on.
Disable anti-virus programs
1Close all open software applications.
2Disable any antivirus programs.
3Double-click the My Computer icon.
In Windows XP, click Start to access the My Computer icon.
4Double-click the CD–ROM drive icon.
5If necessary, double-click setup.exe.
6Follow the instructions on the computer screen to install the software.
Uninstall and reinstall software
Uninstall the printer software, and then reinstall it. For more information, see “Removing and reinstalling the software”
on page 147.
Page does not print
These are possible solutions. Try one or more of the following:
Check messages
If an error message is displayed, resolve the error before trying to print again.
Check power
If the light is not on, make sure the printer is plugged into a properly grounded outlet. Make sure the power cord
is properly connected to the printer.
Reload paper
Remove and then load paper.
Check ink
Check the ink levels, and install new print cartridges if necessary.
145