Lexmark 7500 Series Can send but not receive faxes

6If you want to change the County Code:
aPress or repeatedly until you reach the Country menu item.
bPress or repeatedly until the country or region where you are operating the printer appears.
cPress to save the setting.
Is your printer memory full?
1Dial the receiving number.
2Scan the original document one page at a time.
Can send but not receive faxes
These are possible solutions. Try one or more of the following:
Load paper
Load paper to print any faxes that have been stored in the printer.
Check if Auto Answer is on
If Auto Answer is on:
•The printer will answer after the preset number of telephone rings.
•If you are using a distinctive ring, see “Setting the distinctive ring” on page 132.
1From the control panel, press or repeatedly until Fax is highlighted.
2Press .
3Press or repeatedly until you reach the Auto Answer menu item.
4Check to see if On is selected.
5If not, press or until On appears.
6Press to save.
Check ink
Check the ink levels, and install a new print cartridge if necessary.
Make sure Fax Forwarding is not selected
1From the control panel, press or repeatedly until Fax is highlighted.
2Press .
3Press or repeatedly until the Fax Setup submenu is highlighted.
4Press .
5Press or repeatedly until the Ringing and Answering submenu is highlighted.
6Press .
7Press or repeatedly until you reach Fax Forward.
191