3From the Scan Mode menu, you can:
•Press to preview the job.
•Press to return to the Scan Mode menu from the preview if you need to change a value.
•Press or repeatedly to scroll through the menu items or submenu until you reach the one you want
to change.
•Press or repeatedly to reach the value you want.
4To go into other menu items and values to make additional changes, continue to use the navigation buttons
(, , , and ).
5If needed, press repeatedly to return to the previous menu.
6Press to start the scan job.
The following table explains the function of each menu item and the one submenu in the Scan Mode menu.
Use this To
Scan to Specify the destination of the scan job (where the scanned image is sent).
Color Specify the color of the scanned image (Color or Black & White).
Quality Adjust the quality of the scanned image based on your choice of dots per inch (dpi)
or automatic values.
Original Size Specify the size of the original document.
Change Scan Default
Settings
Access the Scan Default Settings menu. You can specify the values you want
as user default settings for the Color, Quality, and Original Size menu items.
Using the Change Scan Default Settings submenu
1From the Setup menu, press or repeatedly until Change Scan Default Settings is highlighted.
2Press .
3After changing values, press to save these values and exit this submenu.
Use this To
Color Choose to scan in black and white or color.
Quality Choose a resolution in dots per inch (dpi). Values are Automatic 150 dpi, 300 dpi, and 600 dpi.
Original Size Specify the size of the original document. Values are Auto Detect, L, 2L, A6, A5, B5, A4, Wallet,
3 x 5 in., 4 x 6 in., 5 x 7 in., 8 x 10 in., and 8.5 x 11 in.
Changing the default scan settings
1From the control panel, press or repeatedly until Scan is highlighted.
2Press .
3If your printer is connected to more than one computer:
aPress or repeatedly until the computer to which you want to scan is highlighted.
bPress .
110