If your printer does not appear on the list, then try either of the following:

For a USB-connected printer, remove and then reconnect the USB cable.
For a printer that is wirelessly connected, see the Wireless troubleshooting section.
MAKE SURE THE PRINT JOB IS NOT PAUSEDMAKE SURE YOUR PRINTER IS SET AS THE DEFAULT PRINTER
RECONNECT THE PRINTER POWER SUPPLY
1Turn off the printer.

Note: Make sure the printer is not in Power Saver mode. Press and hold for three seconds to turn off the printer.

2Pull out the power cord from the power supply.
3After a minute, reconnect the power cord into the power supply.
4Turn on the printer.
REMOVE AND RECONNECT THE USB CABLE CONNECTED TO YOUR PRINTER
CHECK THE USB CONNECTION
1Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.
2Firmly plug the square end of the USB cable into the back of the printer.
Troubleshooting
133