Editing photos using the printer control panel
1Load photo paper.
2Insert a memory card or flash drive.
The Memory Device screen appears on the display.
3Touch View Photos.
The Select Photos screen appears.
4Touch the photo you want to edit.
5Touch to view the selected photo.
Tips:
•If you want to clear the selected photo, then touch .
•If you wan t to vi ew the p reviou s or nex t photo , then touch t he left or righ t arro w, and t hen to uch to select
the photo.
6Touch . Touch Accept each time you make a selection.
From here You can
Crop Crop a photo.
Brightness Adjust the brightness of a photo.
Red Eye Reduce the red-eye effect caused by light reflection.
Auto Fix Enhance a photo automatically.
Color Effects Select whether to print a photo in black and white, sepia, antique brown, or
antique gray.
7When you are finished editing the photo, touch Done.
8If you want to edit another photo, then touch to return to the Select Photos screen.
9Repeat steps 4 through 8 until all the photos are edited, and then touch Layout.
10 If you want to change the print settings, then touch Change Settings.
If necessary, touch Accept each time you make a selection.
11 Press .
Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.
Printing photos from a memory device u sing the printer software
1Load photo paper.
2Insert a memory card or flash drive.
3Transfer or print the photos:
Printing
47