RECONNECT THE POWER SUPPLY
1Turn off the printer.
Note: Make sure the printer is not in Power Saver mode. Press and hold for three seconds to turn off the printer.
2Pull out the power cord from the power supply.
3After a minute, reconnect the power cord into the power supply.
4Turn on the printer.
TRY RUNNING THE INSTALLER AGAIN
1Close the installer.
2Remove the CD, and then restart the computer.
3Insert the installation software CD and then run the installer ag ain.
Notes:
When you get to the Software Already Installed screen, make sure you select Install a new printer.
If you have already set up your printer, then select Change Connection to skip the hardware setup wizard.
CHECK THAT YOUR COMPUTER IS ABLE TO ACKNOWLEDGE USB ACTIVITY ON THE USB PORT
Open the Device Manager to check if it has activity whenever a USB device is connected to a USB port:
1Click , or click Start and then click Run.
2In the Start Search or Run box, type devmgmt.msc.
3Press Enter, or click OK.
Troubleshooting
159