Warning—Potential Damage: Do not touch any cables, any network adapter,
any connector, the memory device, or the printer in the areas shown while actively
printing, reading, or writing from the memory device. A loss of data can occur.
3If the PictBridge connection is successful, then the following message appears on the display: Camera
Connected. Use Camera to choo se and print photos.
4If you want to change the default print settings:
aTouch More Options to access the PictBridge menu.
bSelect the paper size, paper type, photo size, quality, and layout of the photos that you want to print. Touch
Accept each time you make a selection.
Note: The printer will use the default print settings unless you change the print settings from the camera.
5See the documentation for your camera to begin printing.
Note: If you insert the camera while the printer is performing an other job, then wait for the job to finish before
printing from the camera.
Printing photos from a memory device u sing the proof sheet
1Load letter- or A4-size plain paper.
2Insert a memory card or flash drive.
The Memory Device screen appears on the display.
3Navigate to:
More Options > Proof Sheet > Print Proof Sheet
4Select which photos you want t o print.
You can print a proof sheet:
•For the 20 most recent photos, if there are 20 or more photos on the memory device.
•For all photos on the memory device.
•By date, if the photos on the card were taken on different dates. If you choose this option, select the date, and
then touch Accept.
The proof sheet prints.
5Follow the instructions on the proof sheet to select which photos to pri nt, the number of copies per photo, red-eye
reduction, color effects, page layout, print options, a nd paper size.
Note: When making selections, make sure to fill in the circles completely.
Printing
49