Scenario 4: Digital telephone service thr ough a cable provider

Setup 1: Printer is connected dir ectly to a cable modem

Follow this setup if you normally connect your telephone to a cable modem.
To connect:
1Connect one end of a telephone cable to the port of the printer.
2Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem.
The port labeled Phone Line 2 or Fax Port is not always active. You may need to pay extra to your cable provider
if you want to activate the second phone port.
3Remove the protective plug from the port of the printer, and then connect the telephone to the port.
Tips for this setup:
•To make sure that the phone port on the cable modem is act ive, plug an analog telephone into the phone port,
and then listen for a dial tone. If you hear a dial tone, then th e port is active.
•If you need two phone ports for your devices but do not want to pay extra, then do not plug the printer into the
second phone port. You can use a phone splitter. P lug the phone splitter into the Phone Line 1 or Phone
Port , and then plug the printer and telephone into the splitter.
Make sure you use a phone splitter, not a line splitter. To make sure t hat you are using the corre ct splitter, plug
an analog telephone into the splitter and then listen for a dial tone.
Faxing
80