Chapter 6 Cajun Campus CLI – Layer 2

Set security mode Command

Use the set security mode command to enable or disable MAC security at the stack level. When enabled, the ports are secured based on their individual configuration. When disabled, all the ports in a stack are non-secured.

The syntax for this command is:

set security mode { enable disable }

Example:

Cajun_P330-N> set security mode enable

Security mode enabled.

Set port security Command

Use the set port security command to enable MAC securit on a pot, a range of ports, a module, or a stack.

The syntax for this command is:

set port security { enable disable } [<module>[/<port>]]

{enable disable } - set the port security enable or disable [<module>[/<port>]] - set specific module/port

Example:

Cajun_P330-N> set port security enable 1/22

Port 1/22 secured.

Sync time Command

This command synchronizes the time used by all modules in a stack.

The syntax for this command is:

sync time

Example:

Cajun_P330-N# sync time

Time has been distributed.

Cajun P332MF User’s Guide

87

Page 101
Image 101
Lucent Technologies P332MF manual Set security mode Command, Set port security Command, Sync time Command