Lucent Technologies P332MF Set spantree priority Command, Set spantree priority bridgepriority

Chapter 6 Cajun Campus CLI – Layer 2

Set spantree priority Command

Use the set spantree priority command to set the bridge priority for STP.

The syntax for this command is:

set spantree priority <bridge_priority>

bridge_priority Number representing the priority of the bridge.

The priority level is from 0 to 65535, with 0 indicating high priority and 65535 indicating low priority.

Example:

This example shows how to set the bridge priority to 45000:

Cajun_P330-N# set spantree priority 45000

Bridge priority set to 45000.

Set autopartition Command

Use the set autopartition command to enable or disable auto-partitioning on all the half duplex ports of the stack.

The syntax for this command is:

set autopartition {enabledisable}

Example:

Cajun_P330-N# set autopartition enable

Auto-partition is enabled.

Set license Command

The set license command enables you to activate the SMON capability of the Cajun™ P330 stack. A Cajun P330 stack can include several Cajun P330 modules. One SMON license is required per Cajun P330 stack. Installing the license is very simple. It involves connecting a terminal to one of the Cajun P330 modules and typing in a valid license number (included in the SMON License pack) using the CLI.

For a full description of the SMON License and the installation procedure please refer to the Installation Guide provided with the SMON License.

Cajun P332MF User’s Guide 83