Lucent Technologies P332MF manual Show spantree Command

Chapter 6 Cajun Campus CLI – Layer 2

Following are the show trunk command output fields:

Field	Description
Port	Module and port number(s)
Mode	Tag status of the port (ON - dot1Q tagging mode,
	OFF - clear mode).
Native VLAN	Number of the Port VLAN ID (the VLAN to which
	received untagged traffic will be assigned). If the Port is in
	“clear mode” only frames of this VLAN will be
	transmitted.
VLANs allowed on trunk	Range of values allowed for the Native VLAN (1 to 3071)

Show spantree Command

Use the show spantree command to display spanning-tree information.

The syntax for this command is:

show spantree [<mod_num>[/<port_num>]]

Example:

Cajun_P330-N> show spantree

Spanning tree enabled

Designated Root:			00-40-0d-88-06-c8
Designated Root Priority: 32768
Designated Root Cost: 20
Designated Root Port: 1/1
Root Max Age: 20			Hello Time: 2
Bridge ID MAC ADDR: 00-40-0d-92-04-b4
Bridge		ID priority: 32768
Port		State		Cost	Priority
------		-------------		----------	------------
1	/1	Forwarding		20	128
1	/2	not-connected		20	128
1	/3	LAG-member		20	128
1	/4	LAG-member		20	128
1	/5	not-connected		20	128

Cajun P332MF User’s Guide 51