Lucent Technologies P332MF manual Show cam Commands, Show cam mac macaddr

Chapter 6 Cajun Campus CLI – Layer 2

Output Fields

Field

Port

Send-

Flowcontrol-

Admin

Description

Module and port number

Send flow-control administration. Possible settings:

•ON indicates that the local port is allowed to send flow control frames to the far end.

•OFF indicates that the local port is not allowed to send flow control frames to the far end.

Send-

Flowcontrol-

Oper

Receive-

Flowcontrol-

Admin

Send flow-control operation mode. Possible modes:

•ON indicates that the local port will send flow control frames to the far end.

•OFF indicates that the local port will not send flow control frames to the far end.

Receive flow-control administration. Possible settings:

•ON indicates that the local port will act upon flow control indications if received from the far end.

•OFF indicates that the local port will discard flow control frames if received from the far end.

Receive-

Flowcontrol-

Oper

Show cam Commands

Receive flow-control operation mode. Possible modes:

•ON indicates that the local port will act upon flow control indications received from the far end.

•OFF indicates that the local port will discard flow control frames received from the far end.

Use the show cam commands to display the CAM table entries for a specific port or MAC Address.

The syntax for this command is:

show cam [<mod_num>[/<port_num>]]

and

show cam mac <mac_addr>

Cajun P332MF User’s Guide 49