ATM Expansion Sub-modules

There are three Cajun P330 ATM Expansion Sub-modules:

X330-OC12F1: 500m, Multimode fiber, can also be OC-3 reduced range

X330-OC12S1: 15 km, Single-mode fiber, can also be OC-3

X330-OC3F1: 2 km, Multimode fiber (future version).

The ATM sub-modules can be installed in the following Cajun P330 Family switches:

Cajun P333T Hardware Version C/S 1.3 and higher, with Embedded S/W 2.4 and higher.

Note: The ATM Expansion Sub-module cannot be used in Cajun P333T hardware Versions lower than C/S 1.3.

Cajun P334T Embedded S/W Ver. 2.4 and higher.

Cajun P332MF Embedded S/W Ver. 3.0 and higher.

Cajun P333R Embedded S/W Ver. 2.4 and higher.

Refer to the Cajun X330 ATM Access Module User’s Guide for installation procedures.

The multimode Cajun X330-OC12F1 and X330-OC3F1 (future) ATM sub-modules are Class 1 LED products. The single-mode X330-OC12S1 ATM sub-module is a Class 1 Laser product. They comply with EN 60825-1 and Food and Drug Administration (FDA) 21 CFR 1040.10 and 1040.11.

The sub-modules must be operated under recommended operating conditions.

Safety Information

Single-mode Module Laser Classification

CLASS 1

LASER PRODUCT

Note: Class 1 lasers are inherently safe under reasonably foreseeable conditions of operation.

Caution: The use of optical instruments with this product will increase eye hazard.

114

Cajun P332MF User’s Guide

Page 128
Image 128
Lucent Technologies P332MF manual ATM Expansion Sub-modules